ah great didn't see that write up before, will probably save me snapping a few things.

great, thank you.

i'm going to fit a MK2 dash to my MK1 other than the dash , glove box and center console do i also need the instrument cowl and the plastics that surround the indicator stalk or do the mk1 ones fit, cheers.

casting mark.

replaced the drivers side window winder mechanism and filled the sills with dyanax S-50 cavity wax, i think i put a bit to much in as it was dripping out for hours.

found one now.

i might just buy a new one then as they are all going to be at least 20 years old now.

the cable on my drivers side manual winder has snapped ,any one know if the cables that are available with fit a manual winder , looks a bit of a nightmare as there is a big spring inside which looks like it will fly out.

anyone got a rear number plate panel for a eunos , colour not important, cheers.

thank you :)

i've just bought a torsen type 2 diff and i need some oil, is this the right stuff.
http://www.ebay.co.uk/itm/152171250895? ... EBIDX%3AIT

you could do what i did, i purchased a couple of alignment bolts in case i snapped any and loosened them one by one , i use the car everyday so can't be without it so the spares were just in case any of them snapped but they didn't. normally if they snap you just drift out the old bolt, worse case s...

i also don't like where it mounts to, there is a good chance if you touch those camber bolts you will need the alignment doing.

yeah i suppose i could just use a old pin and solder a wire onto it.

i thought if you jumped the connections at the diagnostic socket that it ruled out it being the relay or the wiring am i wrong ?