What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Dodgy LED's ,I need your help Jon'o

Come and see what our Jon is up to, with his electric gizmos that his mind and hands mould into magic little boxes of tricks, he gets bored very easily, so if you have an idea that you can throw at him, all the better for him to play with ;0)
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Dodgy LED's ,I need your help Jon'o

Postby Mazda Mender » Thu Feb 06, 2014 8:42 am

Anyway Jon'o i have a major problem myself , the LEDs on one bit of the aftermarket 2.5 headlight units as started to flash, now i have had a look and there is which looks like a small control box? the other half of the light units as another, how can i stop them from flashin as the are side lights and it looks F***ing stupid.
As you can see it is a major problem ;0)
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
binarypunk
Moderator
Posts: 1325
Joined: Thu Feb 21, 2013 1:34 pm
Location: NE Somerset
Contact:

Re: Immobilisers

Postby binarypunk » Fri Feb 07, 2014 10:24 am

Are they flashing regularly or randomly? can you make them flash by tapping the light?
Jon - UK Mk1 1.6 1993 Classic Red

Check out my MX5 mods and tools:
http://www.binarypunk.co.uk
Need spares? Go to Autolink!
http://www.autolinkuk.co.uk/
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Dodgy LED's ,I need your help Jon'o

Postby Mazda Mender » Fri Feb 07, 2014 11:19 am

I will have my lad catch a vid of whtas happening, to be honest i do not think it is the LED's at fault but the little box modular,which i guess is a voltage convertor? as ther are 3 grom the box doing the same thing, the other two on a different box but using the same connection plug are fine.
I have checked for water, break in a wire etc all is good, fine on start up ,solid , but 20 minures later when i arrive at work they are flashing and then solid and start flashing again in a ramdom;ish order.
Andrey sells these aftermarket units also.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
binarypunk
Moderator
Posts: 1325
Joined: Thu Feb 21, 2013 1:34 pm
Location: NE Somerset
Contact:

Re: Dodgy LED's ,I need your help Jon'o

Postby binarypunk » Fri Feb 07, 2014 1:12 pm

Sounds very much like a sketchy bit of solder on a circuit board. How handy are you with a soldering iron??
Jon - UK Mk1 1.6 1993 Classic Red

Check out my MX5 mods and tools:
http://www.binarypunk.co.uk
Need spares? Go to Autolink!
http://www.autolinkuk.co.uk/
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Dodgy LED's ,I need your help Jon'o

Postby Mazda Mender » Sat Feb 08, 2014 5:05 pm

binarypunk wrote:Sounds very much like a sketchy bit of solder on a circuit board. How handy are you with a soldering iron??

Oh i am the best of the best buddy :wink: i am ok with soldering Jon, but before i cut open the modual/voltage converter? i need to make sure that that is the problem as she is the everydayer.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
binarypunk
Moderator
Posts: 1325
Joined: Thu Feb 21, 2013 1:34 pm
Location: NE Somerset
Contact:

Re: Dodgy LED's ,I need your help Jon'o

Postby binarypunk » Sat Feb 08, 2014 8:57 pm

If it's just one of the LEDs in the light...probably not, it's probably the circuit board on the bulb...which is likely to be verrrry tiny bits of solder.

If it's all of the LEDs on that side, maybe the box. The best way to be sure is to swap the boxes over if poss.
Jon - UK Mk1 1.6 1993 Classic Red

Check out my MX5 mods and tools:
http://www.binarypunk.co.uk
Need spares? Go to Autolink!
http://www.autolinkuk.co.uk/

Return to “Binarypunk mods & products”

Who is online

Users browsing this forum: No registered users and 3 guests