What you put in, you'll get back ten fold
********We would like to take a moment of your time in thanking everyone that as helped us keep this forum going, from donations, sponsorship, hands on help and all the members that have used us, as it was built to help follow owners keep their passion on the roads, as we step into 2020 we hope all your hopes and dreams come true, we need to heart felt thank the owners that have given donations to help us carry on already so early into the new year and believing in what we are trying to do for everyone , it is also with great pride we thank AUTOLINKMX5 Mr Andrew Stott for sponsoring us again for this year, Andrew is not only a business but a very passionate petrol head and is always there to help fellow members in need regardless, the monthly discount code is always updated every end of the month with a fresh code so jump on getting it cheaper from us and Andrew , looking into this year we are hoping to arrange mazdamenders tech days/weekends this year to become the norm to meet and get our hands dirty all together, drive her like you stole her and weld that smile in place. *********
The mazdamenders team

Handbrake sleeve.

Everything about getting your 5 looking beautiful, shiny & keeping it that way
mrwilko
Just Run In
Posts: 22
Joined: Tue Nov 26, 2013 11:59 pm

Handbrake sleeve.

Postby mrwilko » Thu Dec 19, 2013 4:17 pm

How do I remove the handbrake sleeve so I can change it? Same with gear lever knob.
Thanks.
User avatar
Mazda Mender
Site Admin
Posts: 13965
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: Handbrake sleeve.

Postby Mazda Mender » Thu Dec 19, 2013 4:44 pm

The knob just screws off( OE one will), and the handbrake cover just pulls apart after you remove the one phillips head screw out on the passenger side of the cover.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
Lazza
Site Admin
Posts: 2577
Joined: Thu Dec 08, 2011 12:05 am
Location: Wokingham
Contact:

Re: Handbrake sleeve.

Postby Lazza » Thu Dec 19, 2013 11:47 pm

The handbrake handle is just a push-fit though there is usually a little sticky stuff in there. To remove it give it a bit of a twist while pulling straight off. If its never been removed it might feel like it won't go but it will.
Similar with the gear knob. It just screws off but can be on very tight and can feel like its too tight to remove but again, it will go.
Lazza

2001 Mk2.5 MX5 1.8 Sport
Hard Dog Deuce
GAZ Gold Pro
Mk3 seats
17” OZ Racing Superturissmo wheels (for the toad)
15” Rota Circuit 10 wheels (for track use)
User avatar
Speedy
Epic Poster
Posts: 1691
Joined: Thu Dec 15, 2011 9:24 am
Location: Newport, Shropshire

Re: Handbrake sleeve.

Postby Speedy » Fri Dec 20, 2013 2:06 pm

Some aftermarket Gear Knobs have an Allen Key screw to hold them in-place. :handgestures-thumbup:
1989 Fresh import with 30,000 km, Maruha Four Pot calipers, 270mm disks, Rose jointed drop links, Uprated ARB's, MeisterR CRD Coilovers, Rota wheels, LSD, Zoom console, Maruha Alternator, Jenvey ITB's, Megasquirt ECU
1st Modified Class Bristol OC Spring Rally
2nd Weston Park April 2017
1st 'Modern Classic' Stafford Castle Classic Show July 2018
3rd 'Best Japanese Classic' Tatton Park Aug 18
1st Modified Class Ragley Hall OC National SEP 18
1st Easter show Weston Park 2019
2nd 80's class Newport Easter show 2019


2011 2.0 RC Sport Tech in Aluminium, Smart Top.
mrwilko
Just Run In
Posts: 22
Joined: Tue Nov 26, 2013 11:59 pm

Re: Handbrake sleeve.

Postby mrwilko » Fri Jan 03, 2014 11:32 am

Thanks guys, Looked all over, couldn't see Philips or Allen, tried the twist and pull to no avail. Got one on ebay now.

Return to “Cleaning & Detailing”

Who is online

Users browsing this forum: No registered users and 2 guests