Afternoon all,
Looking for the solid pipe that goes from the union on the driver's side (RHD) to the Flexi on the passenger side. Think the part number is NA01-43-670C. Might need passenger's side Flexi too. Must be able to post.
Thanks, Simon
What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Mk2 solid rear brake pipe
-
- Just Run In
- Posts: 21
- Joined: Sun Nov 17, 2019 5:38 pm
- Location: Aberdeenshire
- Zebbysebby
- Regular
- Posts: 69
- Joined: Fri Jan 24, 2020 1:23 am
- Location: Aberdeenshire.
Re: Mk2 solid rear brake pipe
I think both the Mk1 and Mk2 used the same pipe. I have both these cars as spares. My Mk1 has had the pipe replaced in copper but looks messy, the Mk2 may be an original pipe but I’m not ready to strip it down yet. The condition looks OK but haven’t been able to inspect it fully.
Do you not fancy making one in copper. I’m around Huntly, I could probably help you out using one of mine as a template.
Do you not fancy making one in copper. I’m around Huntly, I could probably help you out using one of mine as a template.
91 Eunos 1.6 BRG manual Conversion.
Re: Mk2 solid rear brake pipe
Go copper. Doesn't rust.
A local garage may make you one up for not too much money,
I get any that I need made up at my local spanner shop.
A local garage may make you one up for not too much money,
I get any that I need made up at my local spanner shop.
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (shouldnt have sold it)
1991 1.6 Eunos Roadster with a bit of bling.
Life is a journey, best travelled topless in an MX5!!
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (shouldnt have sold it)
1991 1.6 Eunos Roadster with a bit of bling.
Life is a journey, best travelled topless in an MX5!!
-
- Just Run In
- Posts: 21
- Joined: Sun Nov 17, 2019 5:38 pm
- Location: Aberdeenshire
Re: Mk2 solid rear brake pipe
Thanks both
I’ve got one on the way made to length just need to shape. If I was doing more I’d get a decent tool but not for one.
Thanks
I’ve got one on the way made to length just need to shape. If I was doing more I’d get a decent tool but not for one.
Thanks
- Zebbysebby
- Regular
- Posts: 69
- Joined: Fri Jan 24, 2020 1:23 am
- Location: Aberdeenshire.
Re: Mk2 solid rear brake pipe
For info, this is a great tool to have for making your own. £32, easy to use and perfect joints first time every time. Soon pays for itself.
91 Eunos 1.6 BRG manual Conversion.
Who is online
Users browsing this forum: No registered users and 6 guests