What you put in, you'll get back ten fold
Having problems logging in? Please clear your cache and remove the MazdaMenders related cookie from your browser.
If you need assistance doing this, don't hesitate to contact us on FaceBook or email forum-admin@mazdamenders.net stating the browser you use.

Regards
Admin

1991 Eunos 1.6 Automatic

Got a problem, need some advice ?
Get in here and ask the pros. There will always be one to bring you the correct answer, quickly.
Please bare in mind advice offered by some may not be correct. Pay attention to user ratings and status for a better idea on their knowledge.
Dougm
New
Posts: 10
Joined: Sun Jan 29, 2017 8:36 am

1991 Eunos 1.6 Automatic

Postby Dougm » Tue Feb 13, 2018 4:02 pm

Can anyone provide me with wiring details for the Interlock switch and overdrive switch on my Auto gear selector, Eunos 1.6 Automatic 1991.
Cheers,
Doug Mason
User avatar
Mazda Mender
Site Admin
Posts: 12458
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: 1991 Eunos 1.6 Automatic

Postby Mazda Mender » Tue Feb 13, 2018 4:23 pm

Whats she doing doug.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
Mazda Mender
Site Admin
Posts: 12458
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: 1991 Eunos 1.6 Automatic

Postby Mazda Mender » Tue Feb 13, 2018 4:23 pm

Whats she doing doug.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
Dougm
New
Posts: 10
Joined: Sun Jan 29, 2017 8:36 am

Re: 1991 Eunos 1.6 Automatic

Postby Dougm » Thu Feb 15, 2018 9:22 am

Hi mm
Starts and drives fine, but When I bought my Eunos the overdrive button was broken and the wiring from the connectors from overdrive switch and interlock is missing. I have a replacement gear selector but can’t see how it connects to wiring loom. As it is at the moment the gear selector is completely isolated from the loom. Apart from not being able to turn overdrive off it works fine. Just thought I would like it to be as it should be, I can’t figure out how the interlock has been bypassed without a wiring diagram. Perhaps I should just leave well alone !
Doug
User avatar
Mazda Mender
Site Admin
Posts: 12458
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: 1991 Eunos 1.6 Automatic

Postby Mazda Mender » Thu Feb 15, 2018 1:09 pm

Show me what you have.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
Mazda Mender
Site Admin
Posts: 12458
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: 1991 Eunos 1.6 Automatic

Postby Mazda Mender » Thu Feb 15, 2018 1:16 pm

This will come in handy at some point....

viewtopic.php?f=124&t=4790
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
Dougm
New
Posts: 10
Joined: Sun Jan 29, 2017 8:36 am

Re: 1991 Eunos 1.6 Automatic

Postby Dougm » Fri Feb 16, 2018 1:15 pm

Hi M-m
Tried to show wiring ( or lack of it ) on my gear selector you can see the two wiring connectors I described. As I say all works ok but the interlock switch must have been bypassed somehow and overdrive switch is inoperative. I just thought when I fit new gear selector I would try and put things back to normal, or as I said perhaps I should leave well alone !
Regards
Doug
Attachments
335E8B13-8E2C-42E9-8DDE-EEE905513AD0.jpeg
335E8B13-8E2C-42E9-8DDE-EEE905513AD0.jpeg (632.99 KiB) Viewed 292 times

Return to “Problems”

Who is online

Users browsing this forum: No registered users and 1 guest