What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Mk2.5 cubby/cup holder spring

Got a problem, need some advice ?
Get in here and ask the pros. There will always be one to bring you the correct answer, quickly.
Please bare in mind advice offered by some may not be correct. Pay attention to user ratings and status for a better idea on their knowledge.
User avatar
Lazza
Site Admin
Posts: 2580
Joined: Thu Dec 08, 2011 12:05 am
Location: Wokingham
Contact:

Mk2.5 cubby/cup holder spring

Postby Lazza » Fri Jul 25, 2014 12:06 pm

The spring (or whatever it is) has gone on lid for the cup holder nearest the arm-rest on my Mk2.5. I haven't taken it off to see what's happened yet. I'd guess it's not actually a spring as it usually springs open and closed.

Any idea what I need to fix and/or replace?
Lazza

2001 Mk2.5 MX5 1.8 Sport
Hard Dog Deuce
GAZ Gold Pro
Mk3 seats
17” OZ Racing Superturissmo wheels (for the toad)
15” Rota Circuit 10 wheels (for track use)
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Mk2.5 cubby/cup holder spring

Postby Mazda Mender » Fri Jul 25, 2014 10:47 pm

It will be one of the plastic lugs that holds the springs at either end, fixed with a stubby screw or small nut and bolt, common thing to happen buddy, you need to take it out to repair it.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Mk2.5 cubby/cup holder spring

Postby Mazda Mender » Tue Aug 12, 2014 1:24 pm

Did you ever sort this Lazza?
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
Lazza
Site Admin
Posts: 2580
Joined: Thu Dec 08, 2011 12:05 am
Location: Wokingham
Contact:

Re: Mk2.5 cubby/cup holder spring

Postby Lazza » Tue Aug 12, 2014 3:05 pm

Not had a chance to even look at it yet.
Lazza

2001 Mk2.5 MX5 1.8 Sport
Hard Dog Deuce
GAZ Gold Pro
Mk3 seats
17” OZ Racing Superturissmo wheels (for the toad)
15” Rota Circuit 10 wheels (for track use)

Return to “Problems”

Who is online

Users browsing this forum: No registered users and 6 guests