Hi, just about installed the wiring for my new glass window. (New hood courtesy of Jack Smith Trimmer Swansea). I bought a 4 pin red led rocker switch. I got the power to the window, but no led.
The four pins are labelled
Looking at the switch from the rear with the led uppermost.
Earth +
(none) light (?)
Any help?
p's Mm your diagram helped me with the wiring using a relay. Thanks
What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Wiring for a 4 pin led toggle switch
- GlennyGills
- Moderator
- Posts: 630
- Joined: Tue Jul 10, 2012 8:13 pm
- Location: Reading
Wiring for a 4 pin led toggle switch
'96 Gleneagles MeisterR Coilovers - engine bling stainless mx5parts full exhaust
- Mazda Mender
- Site Admin
- Posts: 15090
- Joined: Tue Dec 06, 2011 6:18 pm
- Location: Pie land, in the glen of Wiganshire
- Contact:
Re: Wiring for a 4 pin led toggle switch
Lets have a look
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
- binarypunk
- Moderator
- Posts: 1325
- Joined: Thu Feb 21, 2013 1:34 pm
- Location: NE Somerset
- Contact:
Re: Wiring for a 4 pin led toggle switch
If there are pins marked + and - then those will be for the LED, the other two will be the switch poles (which might be connected to anything, so +/- doesn't apply)
Jon - UK Mk1 1.6 1993 Classic Red
Check out my MX5 mods and tools:
http://www.binarypunk.co.uk
Need spares? Go to Autolink!
http://www.autolinkuk.co.uk/
Check out my MX5 mods and tools:
http://www.binarypunk.co.uk
Need spares? Go to Autolink!
http://www.autolinkuk.co.uk/
- GlennyGills
- Moderator
- Posts: 630
- Joined: Tue Jul 10, 2012 8:13 pm
- Location: Reading
Re: Wiring for a 4 pin led toggle switch
Turns out that if you number the pins 1,2,3, 4 and pins 1&2 and pins 3&4 are switched.ie Dual pole,single throw.Then to get the led to light on switching, you have to have +ve on pin 2 and -ve on pin 4. Putting +ve on pin1 and -ve on pin 3 lights the led lights when not switched.
Found this out by taking a switch to pieces.
Thanks...
Found this out by taking a switch to pieces.
Thanks...
'96 Gleneagles MeisterR Coilovers - engine bling stainless mx5parts full exhaust
Who is online
Users browsing this forum: No registered users and 2 guests