I had been wanting to cover up the exhaust manifold for a while but I couldn’t get the MX5PARTS one to fit, mainly I suppose because the manifold is not the original one.
Mine that is fitted is a JASMA stainless steel one.
The first picture shows the shield that I cut to try to get it to fit without success.
Now that I have nearly finished smartening up the engine bay I decided to go ahead and make something to cover the manifold up.
After getting some advice from an OC member I went ahead to construct one out of stainless steel, which surprisingly, I found easier than I had anticipated to work with.
From the pictures you will see I made a cardboard model of what I wanted and then used the pieces to cut the three pieces of stainless steel to the required shapes.
I cut and shaped everything including polishing it, except for the welding which was done by a local, two man, company who work with stainless steel a lot. His welding was superb, it wasn't difficult to get it smooth and level ready to polish. The piece of stainless steel sheet cost £5.00 and the welding £7.50.
The pictures tell the rest of the story.
What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
How I made a Stainless Steel Heat Sheild
How I made a Stainless Steel Heat Sheild
Last edited by pollyanna on Mon Apr 07, 2014 5:29 pm, edited 1 time in total.
- Mazda Mender
- Site Admin
- Posts: 15090
- Joined: Tue Dec 06, 2011 6:18 pm
- Location: Pie land, in the glen of Wiganshire
- Contact:
Re: How I made a Stainless Steel Heat Sheild
There is no stopping you now
M-m
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
Re: How I made a Stainless Steel Heat Sheild
Lovely jubbly
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
- threeflies
- Regular
- Posts: 274
- Joined: Mon Oct 07, 2013 6:54 pm
- Location: Tonbridge, Kent.
Re: How I made a Stainless Steel Heat Sheild
Genius , looks fantastic and professional , top marks
Pete - MK2.5 sport 2002 Sunlight Silver
- nedski
- Serial Poster
- Posts: 733
- Joined: Fri Jun 01, 2012 11:17 pm
- Location: North Kelsey, Market Rasen
- Contact:
Re: How I made a Stainless Steel Heat Sheild
Superb
Mk1 1.6 Turbo. Gaz shocks. Tr Lane roll bar.
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
Re: How I made a Stainless Steel Heat Sheild
nedski wrote:Superb
Cheers Nedski, I forgot to mention in the write up that it makes quite a difference to the engine sound levels when the sheld is fitted, I was pleasantly surprised.
Re: How I made a Stainless Steel Heat Sheild
Very nice! Group buy? Lol
1996 Mk1 Eunos Roadster in red
Who is online
Users browsing this forum: No registered users and 13 guests