What you put in, you'll get back ten fold
Having problems logging in? Please clear your cache and remove the MazdaMenders related cookie from your browser.
If you need assistance doing this, don't hesitate to contact us on FaceBook or email forum-admin@mazdamenders.net stating the browser you use.

Regards
Admin

Rain rail stud

Barefoot Ian
New
Posts: 5
Joined: Mon May 18, 2015 1:00 pm

Rain rail stud

Postby Barefoot Ian » Mon Dec 12, 2016 8:13 pm

The thread is nackered on one stud that holds the rain rail to the bodywork, so I'm unable to tighten the retaining rail. I now have a small leak in this area! Any suggestions to over come this problem?

Sent from my SM-G925F using Tapatalk
User avatar
Mazda Mender
Site Admin
Posts: 12584
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: Rain rail stud

Postby Mazda Mender » Tue Dec 13, 2016 7:52 am

Try and get the thread back by re-cutting it with a stronger s/steel nut or tap a die set would be my first call, before it needs to go deeper, but one missing stud should not make it leak, i would check everything first.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
Barefoot Ian
New
Posts: 5
Joined: Mon May 18, 2015 1:00 pm

Re: Rain rail stud

Postby Barefoot Ian » Tue Dec 13, 2016 8:16 am

Thanks, that's good to know that one bad stud should not make it leak. The beltline rubber is as hard as bullets, so possibly making a bad seal. I will post updates.

Sent from my SM-G925F using Tapatalk

Return to “MK1 -1989 > 1997 (NA)”

Who is online

Users browsing this forum: No registered users and 2 guests