What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Fleas sh*tter project
Fleas sh*tter project
Can i have a locked thread for my project car please. Captain & I were talking about it today & it would be better if it did not go off topic. Ive already took loads of pictures
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas shitter project
when i got home the car was filthy & the roof was green
Then i had to wash it
Then i had to wash it
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Right her we go this is what the bodywork is like before i start
s
#
s
#
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Then the bloke next door said i could use his garage for a few weeks to put the flea so i would have more room to work. Happy days
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Inside
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Under the bonnet........yuk
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Quick clean for now
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Undercarriage
Remove some bits (that's a surprise every clip & bolt was in place) nothing broke or snapped.
Remove some bits (that's a surprise every clip & bolt was in place) nothing broke or snapped.
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Yuk
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
That's not an oil leak on the under tray just been a bit mad with the penetrating spray
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Although the rear sills didn't look to bad i thought i would expose them anyhow as there was slight pitting. The off side one was original but the near side one had been replaced well at least they tried as there was filler at the back. It looked as though the car had been slightly grazed on the near side against something some time age. You can see by the graze below the door jam & also where they tried to touch up just above the rear quarter. Any how there off & you can see what i found. Not to bad as the flea was a lot worse. Off side is very solid & near side is a little worse. Im going to treat it all first inside & out to see what im left with.
I know the cutting out is a bit messy at the moment but i'll tidy that up when the new sills arrive. Just wanted the chemicals to do there thing.
I know the cutting out is a bit messy at the moment but i'll tidy that up when the new sills arrive. Just wanted the chemicals to do there thing.
- Attachments
-
- IMG_4373.JPG (142.02 KiB) Viewed 11201 times
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Worked last night. Been up a while now & got my head on straight. Mmmmm i think i'll get them calipers off & give them a strip down & clean up. I'm gonna throw the discs away as they are a bit crazed & new ones are not to expensive.
I was going to have a go at the welding the quarter's myself but after talking to a mate of mine he said he would spot weld the new ones for me when its ready. May still have a go myself as i have the gear but only used to welding thick old beams & stuff. I'll have a think on that one as it may be a good learning curve Maybe play around on some thinner sheet first
I was going to have a go at the welding the quarter's myself but after talking to a mate of mine he said he would spot weld the new ones for me when its ready. May still have a go myself as i have the gear but only used to welding thick old beams & stuff. I'll have a think on that one as it may be a good learning curve Maybe play around on some thinner sheet first
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Well i think i done quite well this afternoon. Calipers & discs off. Not cleaned them up yet due to i was in a stripping down mood once i got started.
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Re: Fleas sh*tter project
Like said i was in the mood so i ended up with another pile but a little bit bigger
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Return to “Members Mx-5/ Roadsters”
Who is online
Users browsing this forum: No registered users and 7 guests