What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Nedski's Links

Car sales, services, and Mx/Roadster enthusiast, owned by one of the admin team, Nedski aka Neil stokes, fellow owners always welcome for a brew and a jammie dodger.
User avatar
nedski
Serial Poster
Posts: 733
Joined: Fri Jun 01, 2012 11:17 pm
Location: North Kelsey, Market Rasen
Contact:

Nedski's Links

Postby nedski » Fri Nov 07, 2014 12:52 pm

Hi
Over the last couple of years and this Mx5 addiction I've posted a few things that I have done from the garage and for fun.
So I thought I would start to make a page with some links in the one place. You might find some help full tips :coffee:

First with over You Tube 6000 views. How did that happen :confusion-confused:
http://www.mazdamenders.net/forum/viewtopic.php?f=32&t=2089&p=19830&hilit=roll+bar+fitting#p19830

Head work skim and simple porting. 1.8 mk1
http://www.mazdamenders.net/forum/viewtopic.php?f=40&t=3277

Piston oil rings sticking
http://www.mazdamenders.net/forum/viewtopic.php?f=59&t=3601&start=10

Easy oil seal removal
http://www.mazdamenders.net/forum/viewtopic.php?f=135&t=4023

head gasket leak detection fluid
http://www.mazdamenders.net/forum/viewtopic.php?f=91&t=3809

Megasquirt upgrade and rolling road
http://www.mazdamenders.net/forum/viewtopic.php?f=40&t=3412

Getting good results with aerosols
http://www.mazdamenders.net/forum/viewtopic.php?f=90&t=2816

Fitting simple stripes
http://www.mazdamenders.net/forum/viewtopic.php?f=32&t=2775

Wishbone failure with polly bushes
http://www.mazdamenders.net/forum/viewtopic.php?f=37&t=2292

Mk1 Geometry settings
http://www.mazdamenders.net/forum/viewtopic.php?f=40&t=2328
Mk1 1.6 Turbo. Gaz shocks. Tr Lane roll bar.
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk

Return to “Stokes of kelsey”

Who is online

Users browsing this forum: No registered users and 3 guests