What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Mazda menders crank locking tool

User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Mazda menders crank locking tool

Postby Mazda Mender » Mon Jun 30, 2014 9:50 pm

For the Long nose crank engine ( 8 slot crank pully wheel) up to 2005, ÂŁ20 each posted, ÂŁ15 collected, does what it says on the tin, no fancy paint finish, it's a tool, if you want it a colour, rattle can it yourself.
As you can see from the pics it locks top dead centre, you can then lock up the cams with 2 x 1" open large spanner and mole grips ,so all the timing marks stay spot on for rebuild......

DSC01799.jpg
DSC01799.jpg (74.17 KiB) Viewed 13000 times


DSC00115.jpg
DSC00115.jpg (87.8 KiB) Viewed 13000 times


DSC00116.jpg
DSC00116.jpg (84.39 KiB) Viewed 13000 times


DSC00117.jpg
DSC00117.jpg (78.25 KiB) Viewed 13000 times


Contact by P.M if you need one :handgestures-thumbup:
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
nedski
Serial Poster
Posts: 733
Joined: Fri Jun 01, 2012 11:17 pm
Location: North Kelsey, Market Rasen
Contact:

Re: Mazda menders crank locking tool

Postby nedski » Mon Jun 30, 2014 9:59 pm

Duh Ive already got a different type that doesn't lock a tdc. Hey ho.

They look a handy bargain :handgestures-thumbup:
Mk1 1.6 Turbo. Gaz shocks. Tr Lane roll bar.
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
User avatar
Lazza
Site Admin
Posts: 2580
Joined: Thu Dec 08, 2011 12:05 am
Location: Wokingham
Contact:

Re: Mazda menders crank locking tool

Postby Lazza » Mon Jun 30, 2014 10:59 pm

I've used one of these on my 2001 Mk2.5 and can confirm that they work perfectly :obscene-drinkingcheers:
Lazza

2001 Mk2.5 MX5 1.8 Sport
Hard Dog Deuce
GAZ Gold Pro
Mk3 seats
17” OZ Racing Superturissmo wheels (for the toad)
15” Rota Circuit 10 wheels (for track use)
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Mazda menders crank locking tool

Postby Mazda Mender » Mon Jun 30, 2014 11:02 pm

Which type do you have , as i have a few different types, this and the OE one work the best i have found, you know that you need one in your life and in the bottom of your tool box ;0) i am just getting some SNC ones done for when the need comes to do a crank oil seal on one.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Mazda menders crank locking tool

Postby Mazda Mender » Mon Jun 30, 2014 11:04 pm

Lazza wrote:I've used one of these on my 2001 Mk2.5 and can confirm that they work perfectly :obscene-drinkingcheers:

Simple is best, it is just so easy to use, i would be lost with out it now.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
Hamish
Serial Poster
Posts: 346
Joined: Mon Jan 16, 2012 11:00 pm

Re: Mazda menders crank locking tool

Postby Hamish » Mon Jun 30, 2014 11:05 pm

Want....nice simple and spot on. As discussed, will have one Wayne :)

TU

I've had an idea as well... I will wait to get this first ;)
Regards, Hammy.
1990 Eunos 1.6 Classic Red, soon to be a different colour

Return to “MazdaMenders Shop...of all things great”

Who is online

Users browsing this forum: No registered users and 6 guests