Hi
A question for the great and good.
Ive just taken a cylinder head off a mk1 but it's slightly different in the water jacket area, combustion area is very slightly different and i think the inlet port shape under the valve.
Any Ideas. I have a couple of pics. Normal on the left and different on the right.
Again the head above is different to my other mk1's
thanks anyone. My guess is it's a mk2 head
What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
identification ? mk1 or mk2 head
- nedski
- Serial Poster
- Posts: 733
- Joined: Fri Jun 01, 2012 11:17 pm
- Location: North Kelsey, Market Rasen
- Contact:
identification ? mk1 or mk2 head
Mk1 1.6 Turbo. Gaz shocks. Tr Lane roll bar.
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
- BenF
- Epic Poster
- Posts: 1233
- Joined: Sun Dec 23, 2012 12:50 pm
- Location: Bath, Swindon or Noordwijk(NL)
Re: identification ? mk1 or mk2 head
I believe the 94-97 and 97 on are different, without checking, there's a skinny port head and a fat port head on mk.1's but Andy would be your man on this
BRG MKI '90 F-SPEC
'ad victorem ire spolia'
my build (condensed)
Sponsor - PROTECH SHOCKS
Supplier - AUTOLINK
Engine builder & sponsor - BASSET DOWN BALANCING
Machine shop - GRACE ENGINE DEVELOPMENTS
'ad victorem ire spolia'
my build (condensed)
Sponsor - PROTECH SHOCKS
Supplier - AUTOLINK
Engine builder & sponsor - BASSET DOWN BALANCING
Machine shop - GRACE ENGINE DEVELOPMENTS
- Mazda Mender
- Site Admin
- Posts: 15090
- Joined: Tue Dec 06, 2011 6:18 pm
- Location: Pie land, in the glen of Wiganshire
- Contact:
Re: identification ? mk1 or mk2 head
Andy is the man, i'll give him a nudge.
M-m
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
- Andrew
- Site Sponsor
- Posts: 326
- Joined: Thu Dec 08, 2011 10:37 am
- Location: Castle Douglas, Scotland
- Contact:
Re: identification ? mk1 or mk2 head
They are both 1.8 mk1 heads, early & late. BP05 is cast into the back. Mk2 1.8 heads have BP4W and mk2.5 have BP6D.
- nedski
- Serial Poster
- Posts: 733
- Joined: Fri Jun 01, 2012 11:17 pm
- Location: North Kelsey, Market Rasen
- Contact:
Re: identification ? mk1 or mk2 head
Thankyou
Always learning
Always learning
Mk1 1.6 Turbo. Gaz shocks. Tr Lane roll bar.
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
Return to “Mx/Roadster Chat and Banter”
Who is online
Users browsing this forum: No registered users and 21 guests