What you put in, you'll get back ten fold
Members and searchers please be aware that some of our 'how to' guides do not currently show the intended help photos. This is because photobucket wants to charge a monthly amount for us to view our own pics. The photos are currently being replaced. If you need one of our guides and it is missing pics please let one of the Admin team know and we will make that one a priority for you.

Fitting a battery negative kill switch Mk1/2/2.5 NA/NB

User avatar
Mazda Mender
Site Admin
Posts: 12331
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west

Fitting a battery negative kill switch Mk1/2/2.5 NA/NB

Postby Mazda Mender » Thu Feb 23, 2017 8:30 am

Found at Autolinkmx5 http://www.autolinkmx5.com/battery-term ... 7356-p.asp it can be used for many reasons , which is a great item to fit for anyone that has a roadster sat around for any length of time unused, it fits to the negative post connection on the battery and once fitted a simple turn off and on of the wheel is all that is needed, it saves the battery from dark current drain and is also good as an immobiliser , (although I do recommend fitting a cat 2 system,) one can be bought for the dear sum of around ÂŁ4 so not a pocket emptier by any means and is simple to fit.

Tools needed...
1 x Battery isolator switch http://www.autolinkmx5.com/battery-term ... 7356-p.asp
1/4 drive ratchet
1/4 drive extensions
1/4 drive 10mm socket
1/4 drive 13mm socket
large flat screw driver
Copper/brass/alloy webbing for packing

As it arrived....

20170224_205237.jpg (406.35 KiB) Viewed 523 times

And out of the bag.....

20170224_205256.jpg (367.25 KiB) Viewed 523 times

20170224_205306.jpg (386.73 KiB) Viewed 523 times

20170224_205321.jpg (394.54 KiB) Viewed 523 times

http://www.autolinkmx5.com/battery-term ... 7356-p.asp

The clamp section is just a tad small for the OE negative battery clamp to tighten down solid so a strip of copper webbing is cut to act as a filler/packing....

20170224_210034.jpg (360.95 KiB) Viewed 523 times

Roll it up....

20170224_210814.jpg (384.27 KiB) Viewed 523 times

And slightly unroll and wrap it to the end of the clamp section on the insulater switch

20170224_211107.jpg (380.04 KiB) Viewed 523 times

The next step is now on the roadster, we will be using a MK 1 for this walk through guide, but the others are the same it is just that the batteries are in different places...

Undo the Negative/earth battery clamp on the battery with a 1/4 drive ratchet with a long extension and a 10mm socket and remove it from the battery post and pull it out to be worked on easier( Please be very careful NOT to touch the Positive clamp and post with the ratchet/extension or negative correction).

20171001_130227.jpg (465.45 KiB) Viewed 515 times

Once Out in a workable place remove the negative clamp nut and bolt with the 10mm socket...

20171001_125240.jpg (420.83 KiB) Viewed 515 times

20171001_125320.jpg (496.45 KiB) Viewed 515 times

20171001_125325.jpg (545.74 KiB) Viewed 515 times

Separate/open up the battery clamp with a large flat head screw driver...

20171001_125405.jpg (540.99 KiB) Viewed 515 times

Push the Battery cut off switch and the packing into the clamp, making sure that the cut off wheel is screwed out so making it off....

20171001_125458.jpg (455.82 KiB) Viewed 515 times

20171001_125507.jpg (469.55 KiB) Viewed 515 times

Add the nut and bolt back into the negative battery clamp the correct way around...

20171001_125533.jpg (476.91 KiB) Viewed 515 times

Tighten the nut back up with the 1/4 drive ratchet and 10mm socket taking note of the angle it is being bolted down to on the cut off switch...

20171001_125636.jpg (501.79 KiB) Viewed 515 times

20171001_125649.jpg (496.52 KiB) Viewed 515 times

Once tight and being careful not to touch the positive/live clamp or post on the battery push/fit the negative cut off switch onto the negative/earth post on the battery post making sure the wheel is still in the off position...

20171001_125951.jpg (493.16 KiB) Viewed 515 times

Next you need to tighten the new battery cut off switch battery clamp up solid to the battery post in this case wit a 13mm , so using the 1/4 drive ratchet,extensions and 13mm socket being careful not to touch the positive post...

20171001_130142.jpg (499.53 KiB) Viewed 515 times

20171001_130111.jpg (514.8 KiB) Viewed 515 times

Once bolted down tight make sure everything is tight, and turn the wheel to on/connected to check it works correct.
And thats it, you have fitted a kill switch which is very handy as a anti theft item but as most will fit and use one for a roadster that is stored for a while and stops drainage of the battery for when she is ready to be used full time again.
This can be added to any car, and i will add pics of one fitted to a MK2/2.5 soon also.
http://www.autolinkmx5.com/battery-term ... 7356-p.asp
As always any questions please feel free to ask, it is what we are here for.
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.

Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/

Return to “Electrics”

Who is online

Users browsing this forum: No registered users and 2 guests