Hi menders
Does anyone know if the mk2.5 window switches (the one with the auto switch on drivers window) will fit a mk2 car? in other words, is the 'auto' function bit within the switch itself?
Is the wiring the same?
Regards as always.....
What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Search found 42 matches
- Mon Jul 21, 2014 4:38 pm
- Forum: Mx/Roadster Chat and Banter
- Topic: Electric window switches
- Replies: 3
- Views: 3283
- Thu Jul 17, 2014 8:09 am
- Forum: General Body shop
- Topic: NB Door problems - Help please
- Replies: 1
- Views: 9537
NB Door problems - Help please
Hi m-ms I have an NB with a large hole in the side where the door used to be. Door hinges have also been removed from the car and the door (for painting). It's now time to replace everything and my question is 'How do I do it'. Do I put the hinges on the door first, then put door on the car? If so, ...
- Thu Jun 19, 2014 8:53 am
- Forum: Mx/Roadster Chat and Banter
- Topic: Mk2 1.8i Sport
- Replies: 3
- Views: 3186
Re: Mk2 1.8i Sport
Thank you Wayne, much happier now you've said that.....
Tony
Tony
- Wed Jun 18, 2014 11:52 pm
- Forum: Mx/Roadster Chat and Banter
- Topic: Mk2 1.8i Sport
- Replies: 3
- Views: 3186
Mk2 1.8i Sport
Hi mm's
I've just fitted a TIM Oil Temperature gauge to my Mk2 1.8i and on a good steady run, noticed that the oil temperature sits at 100 degrees C. Is this normal? or am I running hot for some reason?
Regards
Tony
I've just fitted a TIM Oil Temperature gauge to my Mk2 1.8i and on a good steady run, noticed that the oil temperature sits at 100 degrees C. Is this normal? or am I running hot for some reason?
Regards
Tony
- Mon Jun 02, 2014 3:18 pm
- Forum: Members Mx-5/ Roadsters
- Topic: Ok, this is Jacko...my 1999 1.8 'sport' Limited Red
- Replies: 8
- Views: 6257
Ok, this is Jacko...my 1999 1.8 'sport' Limited Red
http://i1143.photobucket.com/albums/n638/acacia2000/My%20Mazda/MyMazda4.jpg http://i1143.photobucket.com/albums/n638/acacia2000/My%20Mazda/MyMazda2.jpg http://i1143.photobucket.com/albums/n638/acacia2000/My%20Mazda/MyMazda1.jpg http://i1143.photobucket.com/albums/n638/acacia2000/My%20Mazda/MyMazda3...
- Mon May 12, 2014 1:22 pm
- Forum: Problems
- Topic: Emissions - Mk2
- Replies: 2
- Views: 2628
Emissions - Mk2
Would a small exhaust blow at the rear box make the lambda reading go high?
MOT failure on emissions
MOT failure on emissions
- Sun May 11, 2014 8:02 pm
- Forum: Problems
- Topic: Mk2 Manual Transmission
- Replies: 2
- Views: 2439
Mk2 Manual Transmission
Hi Guys,
Does anyone have a photo of a 5 speed manual gearbox showing which switch is the reversing light switch? It's very close to the neutral switch and I'm confused as to which switch is which? They both look very similar....
Thanks guys
Regards
Tony
Does anyone have a photo of a 5 speed manual gearbox showing which switch is the reversing light switch? It's very close to the neutral switch and I'm confused as to which switch is which? They both look very similar....
Thanks guys
Regards
Tony
- Fri Mar 14, 2014 2:22 pm
- Forum: Problems
- Topic: Mk2 Sport - with Bilstein suspension
- Replies: 7
- Views: 5437
Re: Mk2 Sport - with Bilstein suspension
Ok menders, just wanted to update you on this.... I've just tried covering a spring with black waterproof Heat Shrink. Bit of a job, but its turned out ok :-D I used 24mm unshrunk heat shrink tubing, with a 3:1 shrink rate - the spring coil diameter being 10.5mm (ish) The hard part was getting the t...
- Fri Mar 14, 2014 1:58 pm
- Forum: Problems
- Topic: Mk2 Sport - with Bilstein suspension
- Replies: 7
- Views: 5437
Re: Mk2 Sport - with Bilstein suspension
Thanks binarypunk,
I did think about plasticoat... but I've used that stuff before and made a mess!
I did think about plasticoat... but I've used that stuff before and made a mess!
- Tue Mar 11, 2014 11:04 pm
- Forum: Problems
- Topic: Mk2 Sport - with Bilstein suspension
- Replies: 7
- Views: 5437
Re: Mk2 Sport - with Bilstein suspension
Thanks Wayne, much obliged.
- Tue Mar 11, 2014 7:53 pm
- Forum: Problems
- Topic: Mk2 Sport - with Bilstein suspension
- Replies: 7
- Views: 5437
Re: Mk2 Sport - with Bilstein suspension
Thanks Flea....
- Tue Mar 11, 2014 7:40 pm
- Forum: Problems
- Topic: Mk2 Sport - with Bilstein suspension
- Replies: 7
- Views: 5437
Mk2 Sport - with Bilstein suspension
Hi Menders, a few things please..... Am I right in saying that the longer springs go on the rear of the car? (there is about 25mm difference in length between the 2 sets of springs that I have) Also, the springs seem to be colour coded - the longer ones have grey paint marks on 2 of the coils and th...
- Tue Nov 19, 2013 4:24 pm
- Forum: Mx/Roadster Chat and Banter
- Topic: A HUGE Thank You
- Replies: 3
- Views: 3144
A HUGE Thank You
To Andrew and Mr Chrome for spotting that I had the wrong type of wheel nuts fitted on my Kosai wheels, possibly saving a catastrophe or even my life.....
You are both true Mazda Menders and I can't thank you enough....
Tony
You are both true Mazda Menders and I can't thank you enough....
Tony
- Wed Nov 13, 2013 9:34 pm
- Forum: General chat and banter
- Topic: 24ltr compressor
- Replies: 6
- Views: 5073
Re: 24ltr compressor
I've got a 24 litre..... Can hardly do anything with it!........ So wish I'd got a 50 litre instead - could use all my air tools then!
I'd seriously think about getting a 50 my friend, before you buy and regret..... like me..
I'd seriously think about getting a 50 my friend, before you buy and regret..... like me..
- Wed Nov 06, 2013 8:00 pm
- Forum: Wanted
- Topic: Wheel Centres
- Replies: 6
- Views: 5472
Re: Wheel Centres
Brilliant!